Dog Training Collar with Remote, 3/4 Mile Range Dog Shock Collar, Waterproof and Rechargeable with Beep, Vibration, Safe Shock, Light and Keypad Lock Mode for Large Medium Small Dogs
Specification
|
Specification(1 Collar/2 Collars) |
|
| Model | X3 |
| Packing size(1 collar) | 6.7*4.49*1.73 inches |
| Package weight(1 collar) | 0.63 Pounds |
| Packing size(2 collars) | 6.89*6.69*1.77 inches |
| Package weight(2 collars) | 0.85 Pounds |
| Remote control weight(single) | 0.15 Pounds |
| Collar weight(single) | 0.18 Pounds |
| Adjustable of collar | Maximum circumference 23.6inches |
| Suitable for dogs weight | 10-130 Pounds |
| Collar IP rating | IPX7 |
| Remote control waterproof rating | Not waterproof |
| Collar battery capacity | 350MA |
| Remote control battery capacity | 800MA |
| Collar charging time | 2 hours |
| Remote control charging time | 2 hours |
| Collar standby time | 185 days |
| Remote control standby time | 185 days |
| Collar charging interface | Type-C connection |
| Collar and remote control reception range (X1) | Obstacles 1/4 Mile, open 3/4 Mile |
| Collar and remote control reception range (X2 X3) | Obstacles 1/3 Mile, open 1.1 5Mile |
| Signal receiving method | Two-way reception |
| Training mode | Beep/Vibration/Shock |
| Vibration level | 0-9 |
| Shock level | 0-30 |
| Power consumption of the collar/remote control | 9μA |
| Collar standby power consumption | 60μA |
| Remote control standby power consumption | 48μA |
Features & Details
●【Up to 4000Ft Control Range】Dog shock collar with remote up to 4000ft range allows you to train your dogs easily indoors/outdoors.The dog training collar suitable for all dogs with mild to stubborn temperament.
●【185 Days Stand Time&IPX7 Waterproof 】E collar has long battery life, standby time up to 185 days. A full charge only takes 1-2 hours.The training collar for dogs is IPX7 waterproof, ideal for training in any weather and place.
●【3 Safe Training Modes & Keypad Lock】The shock collars for dogs with 3 safe modes: Beep(5 voices), Vibrate(1-9 levels) and SAFE Shock(1-30 levels).The remote has keypad lock, which can prevent accidental pressing to give the dog the wrong command.
●【4 Channels & Comfortable Collar 】The MimofPet dog training collar can support training up to 4 dogs with the same remote(Need purchase of additional collars).8"-26" adjustable collar is comfortable for all sizes of dogs(10-130lbs).
●【7 days x 24 hours service】If you have any doubt, please contact us immediately.Quality first is our aim.Helps trainers and novice change their dog's behavior.
Training Tips
1. Choose a suitable contact points and Silicone cap, and put it on the dog's neck.
2. If the hair is too thick, separate it by hand so that the Silicone cap touches the skin, making sure both electrodes touch the skin at the same time.
3. Be sure to leave one finger between the collar and the dog's neck.Dog zippers must not be attached to collars.
4. Shock training is not recommended for dogs under 6 months of age, aged, in poor health, pregnant, aggressive, or aggressive towards humans.
5. In order to make your pet less shocked by electric shock, it is recommended to use sound training first, then vibration, and finally use electric shock training. Then you can train your pet step by step.
6. The level of electric shock should start from level 1.
Important Safety Information
1. Disassembly of the collar is strictly prohibited under any circumstances, as it may destroy the waterproof function and thus void the product warranty.
2. If you want to test the electric shock function of the product, please use the delivered neon bulb for testing, do not test with your hands to avoid accidental injury.
3. Note that interference from the environment may cause the product to not work properly, such as high-voltage facilities, communication towers, thunderstorms and strong winds, large buildings, strong electromagnetic interference, etc.
Trouble shooting
1. When pressing buttons such as vibration or electric shock, and there is no response, you should first check:
1.1 Check if the remote control and collar are turned on.
1.2 Check whether the battery power of the remote control and collar is sufficient.
1.3 Check if the charger is 5V, or try another charging cable.
1.4 If the battery has not been used for a long time and the battery voltage is lower than the charging start voltage, it should be charged for a different period of time.
1.5 Verify that the collar is providing stimulation to your pet by placing a test light on the collar.
2. If the shock is weak, or has no effect on pets at all, you should check first.
2.1 Make sure that the contact points of the collar are snug against the pet's skin.
2.2 Try increasing the shock level.
3. If the remote control and collar do not respond or cannot receive signals, you should check first:
3.1 Check whether the remote control and the collar are successfully matched first.
3.2 If it cannot be paired, the collar and remote control should be fully charged first. The collar must be in the off state, and then long press the power button for 3 seconds to enter the red and green light flashing state before pairing (valid time is 30 seconds).
3.3 Check if the button of the remote control is pressed.
3.4 Check whether there is a electromagnetic field interference, strong signal etc.You can cancel the pairing first, and then re-pairing can automatically select a new channel to avoid interference.
4.The collar automatically emits sound, vibration, or electric shock signal, you can check first: check whether the remote control buttons are stuck.
Operating environment and maintenance
1. Do not operate the device in temperatures of 104°F and above.
2. Do not use the remote control when it is snowing, it may cause water ingress and damage the remote control.
3. Do not use this product in places with strong electromagnetic interference, which will seriously damage the performance of the product.
4. Avoid dropping the device on a hard surface or applying excessive pressure to it.
5. Do not use it in a corrosive environment, so as not to cause discoloration, deformation and other damage to the appearance of the product.
6. When not using this product, wipe the surface of the product clean, turn off the power, put it in the box, and put it in a cool and dry place.
7. The collar cannot be immersed in water for a long time.
8. If the remote control falls into the water, please take it out quickly and turn off the power, and then it can be used normally after drying the water.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and collar.
—Connect the equipment into an outlet on a circuit different from that to which the collar is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user's authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FAQ About Product
Answer 1: Yes, multiple collars can be connected. However, when operating the device, you can only choose to connect one or all collars. You cannot select only two or three collars. Collars that do not need to be connected must be cancel pairing. For example, if you select to connect four collars but only need to connect two, such as collar 2 and collar 4, you need to cancel pairing the others on the remote instead of selecting only collar 2 and collar 4 on the remote and leaving collar 1 and collar 3 turned on. If you do not cancel pairing collar 1 and collar 3 from the remote and only turn them off, the remote will issue an out-of-range warning, and the icons of collar 1 and collar 3 on the remote will flash because the signal of the turned-off collars cannot be detected.
Answer 2: When out of range, the collar will emit sound first, and the remote will also beep. After 5 seconds,the collar will vibrate and beep at the same time. However, if you simultaneously press the vibration function on the remote at this time, the vibration function on the remote takes priority over the out-of-range warning function. If you stop pressing the remote, the out-of-range vibration and warning sound will continue to be emitted.
Answer 3: yes, customized Package:1pc/color box or bag, gift box
Answer 4: Standard order:about 7-15 days after confirmed the deposit payment.
Custom order:about 10-20 days after confirmed the deposit payment.
Answer 5: 1-7 working days after confirmation
Answer 6: yes, we are leading manufacturer with strong R&D ability
Answer 7: High quality products with competitive price
Strong R&D ability, keep developing new designs
Support customized logo, box, design,etc
Professional freight forwarder, fast and good service
 |
● OEM & ODM Service-A solution that is almost right is not good enough, create added value for your clients with a Specific,Personalized, Tailored in configuration, equipment and design to meet the different application needs. -The tailored products is big help to promote marketing advantage with your own brand in specific territory.The ODM & OEM options allow you to create unique product for your brand.-Cost savings throughout the product supply value chain and reduced Investments in R&D, Production Overheads and Inventory. |
● Outstanding R&D CapabilityServicing a diverse range of clients requires in-depth industry experience and an understanding of the conditions and markets our customers are facing. Mimofpet’s team has over 8 years of industry research and can provide a high level of supports within our customers challenges such as environmental standards and certification processes. |
 |
 |
● Cost-effective OEM&ODM ServiceMimofpet’s engineering specialists work as an extension of your in house team providing flexibility and cost effectiveness. We inject extensive industrial knowledge and manufacturing skills according to your project needs through dynamic and agile work models. ● Faster time to marketMimofpet has the resources to release new projects immediately. We bring more than 8 years of pet industry experience with 20+ talented specialists who own both the technology skills and the project management knowledge. This allows your team to be more agile and bring complete solution faster to your clients. |
