Dog Bark Deterrent Devices, Rechargeable Ultrasonic Anti Barking Device for Dogs,
Features of Anti-Barking Device with Training/Deterrence Mode Led+ Flash Ultrasonic Repellent Dual Probe Transformer Driver Effective Range 10M Training Mode uses 20-25 kHz Ultrasonic Waves Continuous release of mid-low and high ultrasonic frequencies when the button is pressed & ultrasonic device for dog
Specification
|
Specification |
|
| Product name | Dog Barking Device
|
| Charging time | 1-2H |
| Regular use | 30days |
| Packing specification | 50*44.5*30.5cm |
| Endurance Use range
|
10M |
| Packing weight | 140.6g |
| Battery | 800mAh |
| Mode | LED+ flash expulsion |
| Size | 14.2*9.5*4.2CM |
Features & Details
● Safe and efficient dog training & behavior aids: dog barking control devices emits an ultrasound of 25 KHZ, which exceeds the range of human hearing but can easily lead to the dog's attention without hurting your dog like a dog whistle,safe to correct unwanted behavior and stop dog barking or prevent eating unsafe food, effective pet corrector for dogs of all types and sizes of age 6 months to 8 years old
● sonar heads up to 10M range effect : this anti barking device with dual heads has higher power and more effective than the single head on the market,this electronic dog whistle equips with 800mah rechargeable battery,provide full charge in 1 to 2 hours for about 30 days of regular use
● Two modes with flashlight ultrasonic dog whistle to stop barking ,Deterrent mode:emit a higher intensity ultrasonic sound while the flashlight flashes to drive the fierce dog away,Training mode: emit a lower intensity ultrasonic sound to assist in daily dog training such as stop excessive barking, fighting, biting, and correct other unwanted behaviors,the flashlight also has a long-bright mode for walking your dog at night
● Slim design with anti-mistake lock key: this dog barking deterrent devices is slimmer that make it is better fit even in a smaller hand,the independent and clear keys make it easy to use,the anti-mistake lock key will avoid false triggers,also come with a adjustable wrist strap for use outdoor
● Button pressing with vibration effect : when pressing the button of this ultrasonic dog bark deterrent devices, it will also have a vibration effect, which will bring you a better experience ,and the button light indicator will be red in low power.
Research Shows
About 3% of dogs don't respond to ultrasound due to natural characteristics of dogs and differences in hearing.
This means our device is only 97% satisfied.
If our device doesn't work for your dogs.
please contacts us and we'll buy it back.
Costomer service: sales04@mimofpet.com
Ultrasonic Dog Repeller User Manual
Hi! I am a user manual, let me tell you how to use PU70 ultrasonic dog repeller correctly.
MO70 ultrasonic dog repeller, which uses the principle of ultrasound to emit sound waves to interfere with the dog, so that it will feel stimulated and stops the current behavior. For example, you can expel a dog who is coming to you, or you can let the dog stop barking.
MO70 uses a frequency of 20-25KHZ, which is difficult for human hearing to perceive, but it is the most sensitive frequency for dogs. But the sound will not negatively affect the dog's hearing or health, it is an effective and safe product!
Remote Control
Training Mode
● Training Button
● The training mode uses 20-25 kHz ultrasonic waves. After pressing the button, it will continuously release medium, low, and high ultrasonic frequencies.
● When your dog is barking or has other incorrect behaviors, you can use the training mode to interfere with the dog' s current behavior.
● After repeated interference and the owner' s patient training, the dog will form a certain conditioned reflex, thereby reducing the number of its incorrect behavior.
● Some dogs may become immune to ultrasound, then you can switch repellent mode to continue training.
Repellent Mode
● Repellent Button
● The frequency of the repellent mode will be higher and faster, and it is more suitable for the scene of deterring and expelling dogs.
● The repellent mode uses the 25kHz ultrasonic frequency. After pressing the button, the ultrasonic wave will be continuously released 7- 1 0 times per second.
● When the ultrasonic wave is released, the LED light will flash at the same frequency
● Ultrasonic can cover a range of 10 meters, and the best effect is used within 5 meters
Other Functions
● The LED function of the side switch has a lighting mode, which can illuminate you when walking your dog at night, and your dog can also find you quickly.
● When using the repellent function, it will also flash with the release of the ultrasonic wave.
● The middle position of the side switch indicates that the product is in a normal use state.
● When the side switch is set to locked mode, the product will not be able to be used. If you put the product in your backpack or pocket, you can choose to lock it to avoid pressing the button.
Charging
● When the battery is lower than 20% , a red light will be displayed when using any function.
● When the battery is lower than 5%, if you continue to use the product, the status light will stay on for 5 seconds, and then auto power off.
● The red light will keep flashing when the charging cable is plugged in; until the status light turns blue, which means the device is finished charging.
● You can charge the device for 4-5 hours with an output voltage of 5V via PC, power bank, adapter, etc.
Battery
1. When the device shows low power, please charge it as soon as possible.
2. After fully charging, please remove the power supply as soon as possible to avoid prolonged charging.
3. When the battery is damaged, do not repair or disassemble it.
4. Charging time is about 4-5 hours.
5. Do not use adapters larger than 5V2A to charge the product.
6. This product uses an 800 mAh battery.
7. Do not immerse the product in water or extreme environments (below 0 C or above 4 5 C ) . Extreme environments may shorten the service life of the product.
Terms of Use and Limitation of Liability
1. Use of this product means you accept all the terms and conditions.
2. This product cannot be applied to dogs with strong anti- defense, and has no effect on older or hearing- impaired dogs.
3. Different dogs may have different responses to ultrasound. For best results, you can use this product with other training tools and instructions
4. This product is a professional dog training device and cannot be used for other purposes. Please do not violate local laws in using this product.
5. We are not responsible for any direct or indirect damages caused by the use or misuse of this product, all risks in using this product are the responsibility of the user.
6. Please contact the dealer for parts service, goods return or exchange. We provide technical support only.
FAQ About Product
A: Please ensure the product is powered, when the status light flashes blue, it means the product is working normally. When using it after a full charge, please note that the lock button on the right side of the product is enabled.
A: The ultrasonic frequency of PU70's "training mode" is 20-25kHz, which is gentler than the expulsion mode, and the reaction of different types of dogs will be different (such as age and weight). It turns out that dogs don't respond exactly the same when they're disturbed, but they're all disturbed to some degree. The owner only needs to interfere when a dog needs training, and give rewards when it does well. Patient training can guide it to become a better dog.
A: If meeting a vicious dog or an annoying dog, you can use the “ repellent mode” of PU70. The repellent mode may be affected by the environment when used outdoors, such as other high-frequency sounds or other obstacles. Although it cannot be directly expelled, it will also have a significant deterrent effect on the dog.
A: Please check the adapter and charging cable of the product, and try replacing them to find whether it can be charged. When the product goes into charging it will flash red light.
A: It is not recommended that you use a charger with a voltage exceeding 5V to charge this product, because a charger with an output exceeding 9V or 1 2V may cause damage to this product.
A: This product is designed to guide dogs to proper behavior. The initial use may be stressful for some dogs, but not traumatic for all dogs. Appropriate appeasement when necessary. We do not recommend using this product without the dog misbehaving.
A: We serve you sincerely, and if you have any other questions or needs, you
can contact us by email barkingdeterrentservice@outlook.com
 |
● OEM & ODM Service-A solution that is almost right is not good enough, create added value for your clients with a Specific,Personalized, Tailored in configuration, equipment and design to meet the different application needs. -The tailored products is big help to promote marketing advantage with your own brand in specific territory.The ODM & OEM options allow you to create unique product for your brand.-Cost savings throughout the product supply value chain and reduced Investments in R&D, Production Overheads and Inventory. |
● Outstanding R&D CapabilityServicing a diverse range of clients requires in-depth industry experience and an understanding of the conditions and markets our customers are facing. Mimofpet’s team has over 8 years of industry research and can provide a high level of supports within our customers challenges such as environmental standards and certification processes. |
 |
 |
● Cost-effective OEM&ODM ServiceMimofpet’s engineering specialists work as an extension of your in house team providing flexibility and cost effectiveness. We inject extensive industrial knowledge and manufacturing skills according to your project needs through dynamic and agile work models. ● Faster time to marketMimofpet has the resources to release new projects immediately. We bring more than 8 years of pet industry experience with 20+ talented specialists who own both the technology skills and the project management knowledge. This allows your team to be more agile and bring complete solution faster to your clients. |
